torch.optim

torch.optim is a package implementing various optimization algorithms. Most commonly used methods are already supported, and the interface is general enough, so that more sophisticated ones can be also easily integrated in the future.

How to use an optimizer

To use torch.optim you have to construct an optimizer object, that will hold the current state and will update the parameters based on the computed gradients.

Constructing it

To construct an Optimizer you have to give it an iterable containing the parameters (all should be Variable s) to optimize. Then, you can specify optimizer-specific options such as the learning rate, weight decay, etc.

Note

If you need to move a model to GPU via .cuda(), please do so before constructing optimizers for it. Parameters of a model after .cuda() will be different objects with those before the call.

In general, you should make sure that optimized parameters live in consistent locations when optimizers are constructed and used.

Example:

optimizer = optim.SGD(model.parameters(), lr=0.01, momentum=0.9)
optimizer = optim.Adam([var1, var2], lr=0.0001)

Per-parameter options

Optimizer s also support specifying per-parameter options. To do this, instead of passing an iterable of Variable s, pass in an iterable of dict s. Each of them will define a separate parameter group, and should contain a params key, containing a list of parameters belonging to it. Other keys should match the keyword arguments accepted by the optimizers, and will be used as optimization options for this group.

Note

You can still pass options as keyword arguments. They will be used as defaults, in the groups that didn’t override them. This is useful when you only want to vary a single option, while keeping all others consistent between parameter groups.

For example, this is very useful when one wants to specify per-layer learning rates:

optim.SGD([
                {'params': model.base.parameters()},
                {'params': model.classifier.parameters(), 'lr': 1e-3}
            ], lr=1e-2, momentum=0.9)

This means that model.base’s parameters will use the default learning rate of 1e-2, model.classifier’s parameters will use a learning rate of 1e-3, and a momentum of 0.9 will be used for all parameters.

Taking an optimization step

All optimizers implement a step() method, that updates the parameters. It can be used in two ways:

optimizer.step()

This is a simplified version supported by most optimizers. The function can be called once the gradients are computed using e.g. backward().

Example:

for input, target in dataset:
    optimizer.zero_grad()
    output = model(input)
    loss = loss_fn(output, target)
    loss.backward()
    optimizer.step()

optimizer.step(closure)

Some optimization algorithms such as Conjugate Gradient and LBFGS need to reevaluate the function multiple times, so you have to pass in a closure that allows them to recompute your model. The closure should clear the gradients, compute the loss, and return it.

Example:

for input, target in dataset:
    def closure():
        optimizer.zero_grad()
        output = model(input)
        loss = loss_fn(output, target)
        loss.backward()
        return loss
    optimizer.step(closure)

Base class

class torch.optim.Optimizer(params, defaults)

Base class for all optimizers.

Warning

Parameters need to be specified as collections that have a deterministic ordering that is consistent between runs. Examples of objects that don’t satisfy those properties are sets and iterators over values of dictionaries.

Parameters

• params (iterable) – an iterable of torch.Tensor s or dict s. Specifies what Tensors should be optimized.

• defaults – (dict): a dict containing default values of optimization options (used when a parameter group doesn’t specify them).

Optimizer.add_param_group	Add a param group to the Optimizer s param_groups.
Optimizer.load_state_dict	Loads the optimizer state.
Optimizer.state_dict	Returns the state of the optimizer as a dict.
Optimizer.step	Performs a single optimization step (parameter update).
Optimizer.zero_grad	Sets the gradients of all optimized torch.Tensor s to zero.

Algorithms

Adadelta	Implements Adadelta algorithm.
Adagrad	Implements Adagrad algorithm.
Adam	Implements Adam algorithm.
AdamW	Implements AdamW algorithm.
SparseAdam	Implements lazy version of Adam algorithm suitable for sparse tensors.
Adamax	Implements Adamax algorithm (a variant of Adam based on infinity norm).
ASGD	Implements Averaged Stochastic Gradient Descent.
LBFGS	Implements L-BFGS algorithm, heavily inspired by minFunc.
NAdam	Implements NAdam algorithm.
RAdam	Implements RAdam algorithm.
RMSprop	Implements RMSprop algorithm.
Rprop	Implements the resilient backpropagation algorithm.
SGD	Implements stochastic gradient descent (optionally with momentum).

How to adjust learning rate

torch.optim.lr_scheduler provides several methods to adjust the learning rate based on the number of epochs. torch.optim.lr_scheduler.ReduceLROnPlateau allows dynamic learning rate reducing based on some validation measurements.

Learning rate scheduling should be applied after optimizer’s update; e.g., you should write your code this way:

Example:

model = [Parameter(torch.randn(2, 2, requires_grad=True))]
optimizer = SGD(model, 0.1)
scheduler = ExponentialLR(optimizer, gamma=0.9)

for epoch in range(20):
    for input, target in dataset:
        optimizer.zero_grad()
        output = model(input)
        loss = loss_fn(output, target)
        loss.backward()
        optimizer.step()
    scheduler.step()

Most learning rate schedulers can be called back-to-back (also referred to as chaining schedulers). The result is that each scheduler is applied one after the other on the learning rate obtained by the one preceding it.

Example:

model = [Parameter(torch.randn(2, 2, requires_grad=True))]
optimizer = SGD(model, 0.1)
scheduler1 = ExponentialLR(optimizer, gamma=0.9)
scheduler2 = MultiStepLR(optimizer, milestones=[30,80], gamma=0.1)

for epoch in range(20):
    for input, target in dataset:
        optimizer.zero_grad()
        output = model(input)
        loss = loss_fn(output, target)
        loss.backward()
        optimizer.step()
    scheduler1.step()
    scheduler2.step()

In many places in the documentation, we will use the following template to refer to schedulers algorithms.

>>> scheduler = ...
>>> for epoch in range(100):
>>>     train(...)
>>>     validate(...)
>>>     scheduler.step()

Warning

Prior to PyTorch 1.1.0, the learning rate scheduler was expected to be called before the optimizer’s update; 1.1.0 changed this behavior in a BC-breaking way. If you use the learning rate scheduler (calling scheduler.step()) before the optimizer’s update (calling optimizer.step()), this will skip the first value of the learning rate schedule. If you are unable to reproduce results after upgrading to PyTorch 1.1.0, please check if you are calling scheduler.step() at the wrong time.

lr_scheduler.LambdaLR	Sets the learning rate of each parameter group to the initial lr times a given function.
lr_scheduler.MultiplicativeLR	Multiply the learning rate of each parameter group by the factor given in the specified function.
lr_scheduler.StepLR	Decays the learning rate of each parameter group by gamma every step_size epochs.
lr_scheduler.MultiStepLR	Decays the learning rate of each parameter group by gamma once the number of epoch reaches one of the milestones.
lr_scheduler.ConstantLR	Decays the learning rate of each parameter group by a small constant factor until the number of epoch reaches a pre-defined milestone: total_iters.
lr_scheduler.LinearLR	Decays the learning rate of each parameter group by linearly changing small multiplicative factor until the number of epoch reaches a pre-defined milestone: total_iters.
lr_scheduler.ExponentialLR	Decays the learning rate of each parameter group by gamma every epoch.
lr_scheduler.CosineAnnealingLR	Set the learning rate of each parameter group using a cosine annealing schedule, where $\eta_{max}$ is set to the initial lr and $T_{cur}$ is the number of epochs since the last restart in SGDR:
lr_scheduler.ChainedScheduler	Chains list of learning rate schedulers.
lr_scheduler.SequentialLR	Receives the list of schedulers that is expected to be called sequentially during optimization process and milestone points that provides exact intervals to reflect which scheduler is supposed to be called at a given epoch.
lr_scheduler.ReduceLROnPlateau	Reduce learning rate when a metric has stopped improving.
lr_scheduler.CyclicLR	Sets the learning rate of each parameter group according to cyclical learning rate policy (CLR).
lr_scheduler.OneCycleLR	Sets the learning rate of each parameter group according to the 1cycle learning rate policy.
lr_scheduler.CosineAnnealingWarmRestarts	Set the learning rate of each parameter group using a cosine annealing schedule, where $\eta_{max}$ is set to the initial lr, $T_{cur}$ is the number of epochs since the last restart and $T_{i}$ is the number of epochs between two warm restarts in SGDR:

Stochastic Weight Averaging

torch.optim.swa_utils implements Stochastic Weight Averaging (SWA). In particular, torch.optim.swa_utils.AveragedModel class implements SWA models, torch.optim.swa_utils.SWALR implements the SWA learning rate scheduler and torch.optim.swa_utils.update_bn() is a utility function used to update SWA batch normalization statistics at the end of training.

SWA has been proposed in Averaging Weights Leads to Wider Optima and Better Generalization.

Constructing averaged models

AveragedModel class serves to compute the weights of the SWA model. You can create an averaged model by running:

>>> swa_model = AveragedModel(model)

Here the model model can be an arbitrary torch.nn.Module object. swa_model will keep track of the running averages of the parameters of the model. To update these averages, you can use the update_parameters() function:

>>> swa_model.update_parameters(model)

SWA learning rate schedules

Typically, in SWA the learning rate is set to a high constant value. SWALR is a learning rate scheduler that anneals the learning rate to a fixed value, and then keeps it constant. For example, the following code creates a scheduler that linearly anneals the learning rate from its initial value to 0.05 in 5 epochs within each parameter group:

>>> swa_scheduler = torch.optim.swa_utils.SWALR(optimizer, \
>>>         anneal_strategy="linear", anneal_epochs=5, swa_lr=0.05)

You can also use cosine annealing to a fixed value instead of linear annealing by setting anneal_strategy="cos".

Taking care of batch normalization

update_bn() is a utility function that allows to compute the batchnorm statistics for the SWA model on a given dataloader loader at the end of training:

>>> torch.optim.swa_utils.update_bn(loader, swa_model)

update_bn() applies the swa_model to every element in the dataloader and computes the activation statistics for each batch normalization layer in the model.

Warning

update_bn() assumes that each batch in the dataloader loader is either a tensors or a list of tensors where the first element is the tensor that the network swa_model should be applied to. If your dataloader has a different structure, you can update the batch normalization statistics of the swa_model by doing a forward pass with the swa_model on each element of the dataset.

Custom averaging strategies

By default, torch.optim.swa_utils.AveragedModel computes a running equal average of the parameters that you provide, but you can also use custom averaging functions with the avg_fn parameter. In the following example ema_model computes an exponential moving average.

Example:

>>> ema_avg = lambda averaged_model_parameter, model_parameter, num_averaged:\
>>>         0.1 * averaged_model_parameter + 0.9 * model_parameter
>>> ema_model = torch.optim.swa_utils.AveragedModel(model, avg_fn=ema_avg)

Putting it all together

In the example below, swa_model is the SWA model that accumulates the averages of the weights. We train the model for a total of 300 epochs and we switch to the SWA learning rate schedule and start to collect SWA averages of the parameters at epoch 160:

>>> loader, optimizer, model, loss_fn = ...
>>> swa_model = torch.optim.swa_utils.AveragedModel(model)
>>> scheduler = torch.optim.lr_scheduler.CosineAnnealingLR(optimizer, T_max=300)
>>> swa_start = 160
>>> swa_scheduler = SWALR(optimizer, swa_lr=0.05)
>>>
>>> for epoch in range(300):
>>>       for input, target in loader:
>>>           optimizer.zero_grad()
>>>           loss_fn(model(input), target).backward()
>>>           optimizer.step()
>>>       if epoch > swa_start:
>>>           swa_model.update_parameters(model)
>>>           swa_scheduler.step()
>>>       else:
>>>           scheduler.step()
>>>
>>> # Update bn statistics for the swa_model at the end
>>> torch.optim.swa_utils.update_bn(loader, swa_model)
>>> # Use swa_model to make predictions on test data
>>> preds = swa_model(test_input)